GPU1 and GPU2 core clocks different

GPU1 and GPU2 core clocks different

I am having the exact same problem. Running two GTX 260's in SLI and GPU 2 is just sitting at Clock: 301 mhz, Shader: 602,  Memory: 100 mhz. It doesn't matter whether I unsync the GPU's or not, the sliders do not change the values (in the Precision Graph display) for GPU2.

GPU1 is overclocked a little from stock values. What is the deal? Any ideas?


Update*: GPU-Z is reporting the proper clock speeds for both GPUs (it reflects the settings of Precision), oddly though, on the "Sensors" tab, the clock numbers are wrong for GPU 2, and none of the voltage information is available (yet it has no problem reading the temperature). Is this perhaps a motherboard problem, or a problem with the video card? The fact that one of the cards is 55nm and the other 45nm shouldn't make a difference, should it?


Hold on, this could be a Mobo issue - the bus speed on the second card is at 8x when it should be 16x. This is a Tri-sli board, and I left a PCI-E slot empty between the two cards for cooling, etc. (motherboard gave no directions of which two slots to use for dual SLI). I'll move the card and see if anything changes.

MSI NF980-G65 Bios Rev. 1.0  (NF200 PCI-E chipset)
AMD Phenom II X4 955 BE  @ 3.575 GHz (216 FSB, 16.5x Multi - HT Link x12 @ 2600.0 MHz - NB Freq. x12 @ 2600.0 MHz)
2x2GB Corsair Dominator DDR3 1600mhz running at 1441 MHz 7-8-8-19-38 1T
eVGA GTX 260 Core 216 55nm Revision B1 (Bios 62.00.4C.00.50) Stock @ GPU: 626 MHz, Memory: 1053 MHz, Shader: 1350 MHz
 PCI-E 2.0
eVGA GTX 260 Core 216 65nm Revision A2 (Bios 62.00.1A.00.1A) Stock @ GPU: 576 MHz, Memory:   999 MHz, Shader: 1242 MHz
 PCI-E 2.0
Thermaltake ToughPower 850W PSU 
Windows 7 x64
Latest eVGA Nvidia Drivers 191.07, Precision 1.8.1

Okay, I moved the 55nm into the first PCI-E slot near the CPU, and the 65nm into the second. They are now both running at x16 and the card in the first slot says "Bus Interface: PCI-E 2.0 x16 @ x16 2.0", BUT the card in the second slot says, "PCI-E x16 @ x16 2.0" (Note that it does not show the card itself as 2.0). All of the stock clock speeds are confirmed by the first tab of GPU-Z.

On the Sensors tab of GPU-Z it is still only the 65nm card that provides voltage readings (VDDC) even though it is in a different slot now, yet the 65nm is now reporting those incorrect Core and Memory clock speeds (GPU:300, Mem:100). Whereas before it was the 55nm sitting in slot 2 that showed the slow clock speeds. I assume that since GPU-Z can see the clocks of each card, there is simply a Sensor problem on the Mobo? That still doesn't explain the voltage readings.

Does that 55nm Revision not come with Voltage sensors built into the card?

So I guess now the question is: Are the cards still being clocked the way the Precision sliders say (and the way Tab 1 of GPU-Z reports), and Precision is simply reading the 'broken' sensor? AND is it up to MSI to determine if the non "2.0" recognition is a Bios/Mobo issue, or is it possible the eVGA GTX 260 65nm is fuggered? (I didn't notice whether or not the 2.0 appeared on a different card before I switched them

RF Wireless Headphones

RF Wireless Headphones

RF Wireless HeadphonesRadio Frequency (RF) wireless tv headphones typically operate in the 800-900 MHz band although they may soon follow cordless phone technology and move on to higher frequencies like 2.4 GHz and 5.8 GHz. RF technology has the ability to penetrate through walls and obstacles which gives the added benefit of actually being able to receive wireless audio in several rooms of a house from a single source in one room. With RF wireless headphone transmission the two strereo channels (lefty and right) are modulated into a single frequency for transmission and then demodulated at the receiving side back into left and right channels.
Keep in mind that wireless technology is always susceptible to intereference and/or signal loss. Intereference is caused by other RF wireless devices transmitting within a certain rage of your receiver. In certain circumstances a signal from another device (cordless phone, wireless network, or wireless video tranmsitter) can create static (or noise) in the reception of your headphones. This is especially true when the other device is operating at the same or similar frequency.
Signal loss on the other hand is caused by a weak or lost transmission. This too results in static, poor audio quality, or loss of sound alltogether. Signal loss is due to one of two factors. Either the distance from the transmitter to the receiver is too far for a clear strong signal to be receievd by the headphones, or the signal is being "blocked" in some manner by obstacles. Some of the most troublesome obtacles for RF wireless headphones are metal and water. Metal objects could be a firewall built within a wall, furniture, shelving, fencing (when using outdoors) or extensive plumbing/duct work. RF signal cannot penetrate metal well resulting in a weakening of the signal. Water is not commonly found in your living room so its not usually a problem factor but since the human body contains mostly water it can be an obstacle. For this reason it is helpful to keep the transmitter above head level if at all possible especially in circumstances where there may be obstacles (human or other) between the headphone wearer and the transmitter.

Infrared Headphones
Infrared wireless tv headphones operate by sending their signal in the form of a beam of light typically in the 2-4 MHz band. Due to this fact they are primarily a line of sight device. Meaning you must be able to visually see from the transmitter to the receiver to successfully receive your signal. Most infrared systems are limited to about a 30 foot range with clear open line of sight. With Infrared wireless headphones you get true stereo (left and right channel) separation. This results in excellent stereo sound quality. Infrared transmission is less prone to interference in that it is a line of sight technology. Meaning you can have a similar transmission device in the room right next door without having any negative impact on your reception as long as the signal does not make its way into your room

from - http://www.wireless-headphones.net

Atlantis in dubai

Atlantis in dubai
Wow - the legend of Atlantis is coming to Arabia, and it more than lives up to the myth. This lavish marine-themed resort combines the height of luxury with incredible, unique attractions that will keep you and the kids awe-struck from the first day of your holiday right through to the last! The huge Ambassador Lagoon is a definite highlight, containing over 65,000 fish and marine life, including schools of shark, manta ray and battalions of brightly coloured fish. Wander through the passageways and tunnels of the Lost Chamber at leisure, marveling at uninterrupted underwater views of the ruined streets and boulevards of Atlantis. Another incredible attraction is Aquaventure, the region’s biggest new water park with fantastic thrill rides, water cascades, slides and river-ride action. As a guest, it’s completely FREE of charge and therefore not to be missed! We shouldn’t blow our own trumpet, but our Exclusive Virgin Holidays Concierge Lounge is another Atlantis treasure! With its iPods, PlayStations and laptops,

it’s a great place to listen to music, play a few games, pick up emails and find out the best things to see and do in the local region from our ever friendly Virgin team. If you’re in need of pampering, the ShuiQi Spa is a must with 27 treatment rooms as well as a state-of-the-art fitness centre to tempt you. Whilst you’re busy relaxing, the kids can play to their hearts content at the Atlantis Kids Club with something exciting on the agenda every day. Teens are taken care of too at Club Rush, a very cool hang-out with strictly no parents allowed! When it comes to dining, you’re spoilt for choice with 17 restaurants and bars to choose from. Award-winning Spanish-themed cuisine can be enjoyed at Ossiano’s or head to Nobu’s, the first in the Middle East, for Japanese dishes with an American influence. Rostang’s is also a treat, with its contemporary French brasserie menu. For more casual eats, Kaleidoscope is very family-friendly and there are various outdoor bars and grills to choose from with poolside service. If you still have energy come sundown, the Sanctuary nightclub is for you, boasting a chilled terrace on which to kick-back with a cocktail and enjoy the desert nights!

Where is it?

On Dubai's exclusive Palm Island on 46 hectares of the Crescent, overlooking the Dubai skyline. Atlantis is just a 25-min drive from the centre of Dubai, using the underwater 6-lane highway connecting The Palm to the mainland. There is also a monorail to the mainland. Transfer time from airport: 50 min.

Facilities

17 restaurants and bars including 4 celebrity chefs. Sophisticated seafood, fresh sushi, traditional Italian and classic French cuisine. The Avenues with over 2 dozen luxury shops, 4 speciality restaurants, including NOBU, and a nightclub. 17 hectares of Aquaventure with 700m of exclusive beach and 2.5km of water adventures, including river-ride action over cascades, tidal waves and rapids. 2 Royal Tower pools. The Ambassador Lagoon, which has over 65,000 marine creatures in its 3-million gallon habitat. A 10m-long viewing panel looks right into the heart of Atlantis. The Lost Chambers, an Atlantean-themed archaeological site, features a maze of underground tunnels, offering uninterrupted underwater vistas into the boulevards and streets of the fabled Atlantis, bringing this historic story to life. Dolphin Bay. Tennis. ShuiQi Spa & Fitness Centre. Atlantis Kids Club and Club Rush for teens (local charge). Exclusive Virgin Holidays Concierge Lounge.

Room info

1,539 generously proportioned rooms including 166 suites in 2 towers. Deluxe and Atlantis Rooms all offer fantastic vistas, whatever the level, whether staying in the East or West Tower of the main Royal Towers. All with air-conditioning, satellite TV, tea/coffee-making facilities, mini-bar, safe, iron and board, and hairdryer. Deluxe Rooms are located on the lower floors. Rooms have 1 king-size bed or 2 double beds, sleeping max 2 adults and 2 children. Atlantis Rooms are located on the higher floors and offer enhanced ocean views.

Room Upgrade

Imperial Club Upgrades are available at a supplement offering luxurious surroundings with stunning views and select dining options. Exclusive benefits include imperial club lounge access between 7:00am and 11:00pm, continental breakfast in the lounge between 7:00am – 11:00am, complimentary breakfast also served in Saffron restaurant, afternoon tea between 3:00pm and 5:00pm, cocktails and canapés from 6:00pm until 8:00pm, light snacks, tea, coffee, juices and soft drinks, daily access from 10:00am until 6:00pm to Atlantis Kids Club (meals are chargeable), internet access in your room, use of the steam, sauna and jet pool facilities at ShuiQi Spa, selection of international newspapers and magazines available within the lounge and exclusive spa offers

Tips for Natural Skin Care

Tips for Natural Skin Care
For the bride. The skin is smooth and good health always fascinated me. Be read in this way. We have a formula that anyone can use it. The budget was introduced. 1. Drink at least 8 glasses of water per day can make your skin radiant and glowing in a way that we should not waste money 2. Should drink tea with honey will stimulate the blood flow better. 3. Should drink fresh fruit or vegetables every day. You can get the vitamins and minerals increases in skin temperature. Bright, young skin. And drinking water. It allows the skin to vitamin nutrition efforts. 4. Always rinse thoroughly. If using a product like soap foam or gel should be gently part the cheeks. Then use the index finger, middle finger and ring finger to gently rub. The forehead. Roll up for the nose and rub it along the muscle. Then use the index finger and ring finger and rub the lips. The area around the eyes to rub them gently as possible. The index finger is placed at the upper eyelid. And ring finger into the eye. Then, pat the head from eye to eye gently. Will help your face look bright, clean. It is pretty clear in the budget, then we also have beautiful skin with a natural formula. Try to leave the bride ... 1. Recipe face radiant skin. The papaya is blended thoroughly and bring to a face mask throughout. Leave it for about 10-15 minutes, because the fruit will have to help remove dead skin cells off. Do this once a week, depending on the surface. If this should do it 2-3 times a week may also use the radish. Or cucumber to help add moisture to the skin as well. By sliding a thin shell, chilled for a moment. Then paste it into your face for about 15 minutes, then rinse with cold water or plain water to make it pretty clear as well. 2. Formula pores. Put about 1 teaspoon of honey mixed with 2 tablespoons cucumber blended thoroughly. The disposable face mask for about 20 minutes, then rinse with cold water. Your skin will be soft and that it yielded instant. One way or another. Apple is a fruit mixed with low-fat milk 1 tablespoon honey 1 tablespoon blended together to gently massage the face mask, leave for 20 minutes, then rinse. Either way, this will help heal the skin and hair, the tight-fitting hole pretty nasty. 3. The formula to reduce it. Use about 1 cup pineapple juice, water and extract the pulp out. Using cotton wool moistened with juice from one face to leave skin around the eyes and around the mouth. Leave it for about 20 minutes, rinse with warm water. (Use a tart pineapple flavor is better than the sweet taste. It is effective in reducing it better), or 1 egg white ½ teaspoon of lemon juice and 1 small cucumber, were blended together thoroughly. Then the mask is about 20 minutes to leave the area around the eyes and mouth. Then rinse with warm water. You're done. 4. The formula reduces acne. Marl is a large grain mixed with 1 teaspoon lemon juice, then head to the point of the acne before bed. Then rinse thoroughly with warm water in the morning. Will notice that the skin is collapsed. The skin on your face, you're white, and clear up quite dramatically. 5. Formulated to remove spots. Bring orange juice to the water, then put about 2 tablespoons milk 1 tablespoon of the mixture into a poor mix everything together well. Before coming to the plate and rub the cotton over your face gently. Except around the eyes and mouth. Leave it for a while (about 20 minutes) then rinse with warm water. Doing this on a regular basis, your skin will glow. Qingdao black skin, it gradually. Fade away eventually. 6. The formula reduces the problem of dryness and sunshine. Scoop the avocado flesh, about ¼ cup of water mixed with lemon juice 1 teaspoon honey and 1 teaspoon, put into blender. The homogeneous mix. The mask over your face and leave it around the mouth and eyes. Leave it for a moment, about 20 minutes, then rinse with warm water. This face was white skin dryness can occur

Mercedes-Benz CL63AMG Value.

Mercedes-Benz CL63AMG Value.

New versions of the heart.
Leave the launch of the facelift of the regular version of the sport the giant strain CL-Class has been the Mercedes-Benz - Mercedes-Benz and the version with the strength of the line of the AMG in the code CL63AMG to veil it. The alternative for customers who have a heavy right foot. The sport needs to meet both its prestige and strength. The main aspects of the car is not looking to get a Minor Change to fresh from the original version that was released for sale since 2007, but the changes under the hood face. It normally. Known code 6208 cc V8 engine CL63AMG with his breathing and the development of the AMG. But for this generation. Despite using the same code. It was replaced with the power on the front of the box. 


That's because the engine is removed and replaced with a V-8 NA twin cam 32-valve V-8 engine, 5500 cc twin turbo off valve and the International Bowl and coolers. AMG developed a new way to meet the needs of the modern era is less fuel consumption. However, there are a lot more power. The solution is. Reducing the capacity of the cylinder. And use compressed air to be more useful.
Despite the number of cylinders are equal. The engine capacity was reduced from 6208 to 5461 cc, 747 cc or less of the energy and oil do not worry. The new engine has been improved with the installation directory's content rather than length. The fuel enters the combustion chamber. Followed by a single turbo. Which can rotate up to 185,000 revolutions per minute. As part of the engine are designed and manufactured with materials that are resistant under extreme use. Cylinder made of aluminum. The lightweight With Forged crankshaft manufacturing process and reduce friction and Pumping Loss of parts of the work which will affect the performance of a number of horses in the stables. And the rate of fuel consumption. As well as the installation of fiber-line catalog. Converter close to the exhaust manifold. Makes it possible to run faster. The removal of toxic gases in the exhaust.
The result is a maximum level of 536 hp from 525 hp and maximum torque is 81.4 Kk.-m. and install the AMG Performance Package, which will boost the turbo to work out the most. Number of horses in the stables, it would be up to 563 hp and torque to the rear with 91.6 Kk.-m. transmission, automatic transmission, seven strokes.




The excellent performance of the car and foot and foot ends. In the original version from the factory, acceleration 0-100 km / h in 4.4 seconds and dropped to 4.3 seconds when equipped with the AMG Performance Package and the speed was electronically locked out at 155 miles / hour. or 250 km / hour. If a figure moves up to AMG 186 km / h or 300 km / hour.
It is also more environmentally friendly. Because the ground level emissions decreased from 6208 cc V-8 engine and emission control standards in the EURO 5 in Europe or have been in the LEV-II class in the U.S. market. Along with the original version of the engine's fuel efficiency another 27%. The exterior has been changed from the original version that was launched in 2007, which is the third generation of the CL-Class line is clearly not a sport that focuses on the light curve is more concave. The new front grille design. Or a sporty front bumper with spot light of the long-run LED bulbs, which are more durable and more efficient lighting. At the end of the new tail lights. Move towards the opposite end with left - right side of the plate.
European market for the first time later this year. The price is not disclosed. It is expected to cost more than the original version, not much. The original version sold in Germany. The Mercedes-Benz - Mercedes-Benz is set at 160,769 euros, or 7.32 million Baht

Toyota Vios review

Toyota Vios review

Vios car sales are rated as number one. The passenger car market and small passenger car market in Thailand. The success of sales like this. Toyota has focused on the development of the new Vios, under the concept "Make It Happen" is a challenge in creating the actual. Design. And develop a world-class luxury sports a unique design, both inside and outside. Technologically advanced world. Superior performance levels. And confidence of driving with modern safety equipment. It is shown that the new Vios will be accepted. And their customers, both local. And abroad with pride. The new Vios. ... An outstanding reflection of all degrees. More luxury in every aspect. The new grille design with chrome strip sporty luxury. Multi-reflector taillight lens design. The brightest example of its security. Her new lid. With a sleek chrome trim. Luxury angle. A newly designed 15-inch alloy wheels with tires in size 185/60R15. Fog lights. Improves visibility when driving in rain or fog. The elegant, clear turn signal side mirrors enhance safety.


... To enjoy the sporty luxury car. The sample design is innovative and convenient. With every use. Center console and door panels, decorative metallic cool new style. Leather gear knob. With the new gear, offers elegant chrome. Sporty leather steering wheel with audio control switches. Convenience and safety while driving. Driver information display, MID (Multi-information Display) displays useful information such as a driving distance average fuel consumption rate. And average speed, etc. AUX jack for MP3 players to modern life. Throughout the trip. The engine and suspension.



 Driving style. The power of the engine. The remarkable acceleration. And fuel efficiency. Engine 1NZ-FE DOHC 16-valve VVT-i. Cylinder capacity of 1497 cc. Max 80 kW (109ps) / 6,000 rpm. Maximum torque of 141 Nm - m / 4200 rpm. Controlled access. Make every trip a smooth, soft front suspension. Macpherson Construction Group with Stabilizer. The rear suspension torque beam length. Security protection. Anti-lock braking system (ABS) prevents wheels locking during sudden braking or braking on a slippery road. Brake force distribution (EBD) help distribute brake force at each wheel to work in order to control the car better balance, even when braking while cornering. Supplemental braking system (BA) will increase the brake force. In the event of sudden braking. To stop in a shorter period. Security protection. Safety GOA strong cabin structure helps to enhance the absorption of shocks from the collision. System to absorb shocks. The front airbags that can absorb shocks. Reduce the severity of the collision with the force distribution to the body. Equipped with front and side beams. To reduce the impact head to the side. Designed to help reduce the impact to the head of the driver and passengers in the event of a collision. Dual front SRS airbags, safety protection for both driver and passengers. The seat and WIL (Whiplash Injury Lessening) front seats installed. To minimize trauma to the neck bone. When a collision from behind. Front seat belts with automatic tension forces pull back and relax. The brace is attached to the driver and passenger seat when the collision and injury of the band. Of seat belts

U.S. jewelry Jewelry Stores Industry

U.S. jewelry Jewelry Stores Industry
Production in the United States. Of the US Census Bureau statistics, in 2007, the number of U.S. jewelry manufacturers. (Not included in the artificial), there are about 1.7 billion manufacturing plant in the U.S., mainly small businesses. Employment in the industry only has about 33,000 people in total, about 21,000 people are producing workers. Production value in 2008 approximately 8.3 billion dollars. The majority, or about 70 percent of the value of production of gold and platinum jewelry produced about 10 percent of the value of silver. Most raw materials used in production or about 32 percent of the precious metals as gold and platinum jewelry is 22 percent of the value such as diamonds, semi-precious gemstones. Jewelry, artificial (synthetic) and Pearl Sikhs. Other major producing states in the New York State. (New York) and the State of Rhode Island production value of the two sources together is equivalent to about 51 percent of the value of jewelry products totaled U.S.. The market for trade in goods, jewelry. Market value of about 30 billion dollars per year. The market consists of a small market (market segments) are numerous in both the retail and wholesale levels. Products sold in the market. In normal economic circumstances. Jewelry has been popular among consumers and sales are high. (A), jewelry made of precious metals. The most popular is the diamond. Diamond jewelry market, accounting for about 46 percent of the total jewelry market. (B) in circumstances of market economy for use in jewelry, engagement and wedding (bridal jewelry) and a strong market share of approximately 35 percent of the total jewelry market. (C) and gold jewelry with a market share in the consumption of approximately 11 gold jewelry sold in the U.S. market is mostly gold, 10K, 14K, 18K and 22K are likely gold, 10K is gaining in popularity more and more. because they are cheap. (D), jewelry made of gems, the other's share of the market, consuming approximately nine channels in the retail market with the specialty stores, department stores, mass merchants like Wal-Mart (retail jewelry. The largest of the U.S.) and direct sales for about 47 percent of jewelry sales.



 The U.S. in 2008 came from retailers such as specialty stores by 11 of the retail category, discounters such as Wal-Mart 8 percent of the stock of department stores 2 percent of the retailers that sell them. only 6 percent of its members come from mass merchants stores of 6 per cent of direct sales via the Internet or mail orders, the rest is sold in other forms. Sales in the retail market with the highest growth rate. Is sold via the Internet. Jewelry products to the U.S. distribution system. System is not complicated. Most retailers buy goods from the factory. Manufacturer or wholesaler of many, to be sold to consumers. Pricing, marketing and promotion is the responsibility of retailers, some retailers may be selling to factories. Made in the style of. "Consignment" for the retail portion of the products are made manually. This group has a large number of retailers and small businesses. Current market conditions. U.S. economic conditions now affecting the jewelry market like never before. Although the current price of jewelry products made of precious metals and gems from the middle level. However, the overall consumption remained significantly lower in the circumstances, the more expensive luxury goods market is significantly lower in the circumstances as well. Circumstances, this is the first economic downturn affecting consumers' consumption and extremely high visibility. Retailers have not left a lot of the retailers cut orders. There are reports that the retail jewelry business that many cases. Will reduce the number of trips to visit the trade show accessories. To play an important week to meet social and educational products. I do not intend to purchase at present, unless it was very beautiful and exotic products that are not available in the market, it might consider buying. U.S. economic situation and the current gold market forced retailers to large multi-channel to increase revenues by getting into the business of buying gold from consumers is increasing. Most wholesalers have left as well, so try to sell products using our pricing policy to avoid the substantial price increases. Producers to control the cost of production in order to maintain the price level to rise. The prospect of the market today. Although the overall consumption is reduced, but opportunities still exist because of the market. 1.'s A lot to digest. Opportunities for a wide range of products and a variety of formats. 2. Intakes for use in jewelry, engagement or wedding is still going on at all times. 3. Jewelry, exotic, beautiful look to continue to generate interest among U.S. consumers. 4. Due to the consumption of jewelry varies depending on the level of individual consumers. And markets are divided according to income levels as well. Thus, although the overall economic downturn of the market opportunity and overall consumption is reduced significantly but not completely eliminated. International trade. Trade, import most of the jewelry consumer market in the United States comes from imports during the years 2002 - 2007, import growth since 2008, the import value of the jewelry of the United States began to decline (in 2008, the year in the United States. into a real economic downturn), the U.S. is a major source of supply to India, China, Thailand, Canada and Italy, imported from Thailand. Most of the imports.

RAW MATERIALS FOR MAKE FOOD INDUSTRY

RAW MATERIALS FOR MAKE FOOD INDUSTRY

Rapidly rising food prices - bread and milk products are very expensive. . Berlin (RPO), increased food prices for months - and no end in sight. Consumers are ready for the period of rising prices for food.

    "The rising cost of raw material price increases inevitable," the President of the Federation of German Food Industry (BVE), Sabine Eichner said in Berlin. The reason is the increase in prices of agricultural products like rice, meat, poultry and milk.


 The Agricultural Marketing Service (AMI), an increase in poultry prices in May because the call is American, the price of dairy products since the beginning of the year, and more. More money for milk and poultry. In June, prices for poultry and dairy products has remained stable or re-tighten, he said. For cereals and oilseeds prices. However, due to uncertainty about the volatility of the time. If your fear of loss of agricultural income should AMI According to experts, the weather is not too low in price.

    This upward trend will not stop Eichner said, "about the rise of the price we have to get used to in the future." Weather is not disabled, but also increases the world population. "More and wants to eat," said Eichner. Baker made a sharp rise in prices. According to the Berlin "Tagesspiegel" in the oven for bread and rolls to negotiate a higher price. "In the fall of the annual negotiations with retailers," said the director of the Association of German bakeries, Armin Juncker.

    "We will use this method to set a heavy price --. Otherwise, it will" move "to a single digit," said Juncker. The situation is different from sugar. "We honor the contract and delivered on time, as always," a spokesman for the largest European producer of sugar Südzucker said. In addition, the European Commission in the spring of the sale of sugar in the food market is highly regulated and licensed. "I do not know that the price pressure will come," the spokesman said. There are always fluctuations in price and speed of Südzucker trying to get rid of these long-term volatility. In May, food prices rose a strong 3.3 percent over the previous year. The majority of skin fats and oils (up 18.2 percent), butter cost 28.2 percent more, margarine, 8.4 percent of the price increase was also found in dairy products. (5.2 percent), cream cost 12.0 percent more, Quark 7.8 percent

The Most Expensive Paintings

The Most Expensive Paintings

1 Jackson Pollock. "No. 5, 1948", 1948. $ 140 million. Private sale, 2006 Seller: David Geffen buyers: Unknown (rumored to be a Mexican businessman David Martin). Now, "the pool water," a remarkable painting of Jackson Pollock is the most expensive ever sold. But of course, has never been confirmed. (The prices listed here are generally accepted to be true), too, not just the sum. It shows the strength of the art market. The growing interest in the work of contemporary art.

2 Willem de Kooning. "Woman III", 1952-53. $ 137,500,000. Private sale, 2006 Seller: David Geffen Buyer: Steven Cohen. Before Pollock, de Kooning, at the conclusion of the displaced expression inmediate Impressionism American abstract art is the most sought-time. This painting is "Woman" by Willem de Kooning is still in private hands. One such woman described by T. Hess as a "Black Angel" - was chosen by theartwolf.com history as one of 50 masterpieces of painting.

 3 Gustav Klimt. "Adele Bloch - Bauer I", 1907. $ 135 million. Private sale, 2006 Buyer: Ronald Lauder. The acquisition of overtime cosmetics magnate Ronald Lauder from the shock in the art world and beyond. However, for the magnificent paid. But the way in which it was sold, the auction house was far from noisy. The painting is part of a group of five paintings that were soon to return to the heirs of Ferdinand Bloch - Bauer Nazi seizure of his paintings during World War II and after the war canvas. was placed at the National Gallery of Canada in 1948.


4 Pablo Picasso. "Naked, green leaves and bust", 1932. $ 106,500,000. Christie 's New York, May 2010 Buyer: anonymous This spectacular and colorful masterpieces by Picasso is the most expensive painting ever sold at auction. The original collection of Mrs. Sidney F. Brody, who has never been publicly exhibited since 1961.

5 Pablo Picasso. "Garcon a la pipe", 1904. $ 104,100,000. Sotheby 's New York, May 2004 Buyer: anonymous The sale of a young smoker is successful at an auction of works of art. He broke Vincent van Gogh, held since 1990 and is the first $ 100 million barrier was broken. Although the names of the buyers who do not share some sources say may Guido Barilla, the Italian pasta magnate